SMTP Error 454 - Temporary authentication failure, or TLS not available. | Warmup Inbox
SMTP Error Codes: 454
The short answer
SMTP 454 is a temporary failure. It most often means a temporary authentication problem (454 4.7.0: too many login attempts, Exchange clock or SPN issues, SES rate throttling, or TLS unavailable) or relay access denied (454 4.7.1). Back off and retry, fix credentials or the App Password, or resolve TLS.
Quick fix
Retry; verify TLS is available and credentials are correct.
4 - Temporary. Safe to retry. The message is not lost and most servers retry automatically.
What it means
454 is a transient reply. Per RFC 5321, any code starting with 4 means the command was refused but the condition is temporary, so the client should retry later. That reframes most 454 troubleshooting: unlike a permanent 5xx, a well-behaved client should back off and retry rather than treat it as a hard failure. It is used for two temporary conditions, told apart by the enhanced code.
Common causes
Temporary authentication failure (454 4.7.0)
The server accepted the AUTH format but could not complete login now. Google returns "454 4.7.0 Too many login attempts" when an account exceeds its login-frequency or connection limits.
Sending throttle
Amazon SES replies "454 Throttling failure: Maximum sending rate exceeded" past your rate, and a separate "454 Throttling failure: Daily message quota exceeded" when you hit the 24-hour limit (which needs a different fix: wait or request an increase).
Server auth infrastructure
On Exchange, "454 4.7.0 Temporary authentication failure" (Event ID 1035) is usually clock skew over 5 minutes, AD replication lag, missing or duplicate SPNs, or blocked Kerberos ports, not your client credentials.
TLS not available
The STARTTLS extension defines "454 TLS not available due to temporary reason", for example an invalid or temporarily unavailable certificate.
Relay or auth denial (454 4.7.1)
"454 4.7.1 Relay access denied" means the server requires authentication before it accepts the recipient.
How to fix it
Retry with backoff first
For SES throttling, AWS advises waiting 5s, then 10s, then 30s, and if the third retry fails, 20 minutes before repeating. For Google "too many login attempts", pause and reduce the number of tools connected to the mailbox.Verify credentials the right way
For Gmail, do not look for "Less Secure Apps"; Google removed it (personal accounts in 2022, Workspace fully by September 30, 2024). Use an App Password with 2-Step Verification, or OAuth2.Fix TLS for a TLS-unavailable 454
Ensure the server certificate is valid and current, connect on a TLS-capable port, and issue STARTTLS only once. Both 587 (STARTTLS) and 465 (implicit TLS) are valid.Fix relay denial for 454 4.7.1
Authenticate before sending, or confirm your IP or account is authorized to relay through that server.Server operators (Exchange 454 4.7.0)
Sync clocks to within 5 minutes, force AD replication, verify and deduplicate the SMTP SPNs, open Kerberos ports, and confirm Exchange authentication is enabled on the receive connector.
Paired code
A real bounce often shows both a 3-digit code and an enhanced code together. This one commonly pairs with:
X.7.0 Other or undefined security status
Common questions
Is 454 permanent?
No. It is a transient reply; the command was refused but the condition is temporary and the sender should retry later.
What is the difference between 454 4.7.0 and 454 4.7.1?
4.7.0 is a temporary auth or TLS failure (retry, fix credentials, or fix TLS). 4.7.1 is relay access denied (authenticate or get your IP authorized).
Why does Gmail return 454 4.7.0 Too many login attempts?
The account exceeded its login-frequency or concurrent-connection limit, often from repeated bad passwords or too many tools polling the same mailbox. Pause and reduce connections.
Related codes
- 535 Authentication failed.
- 530 Authentication required.
- 432 Recipient incoming mail queue stopped (Exchange).
- 421 Service not available, closing channel.
- 450 Mailbox unavailable (temporary).
Most rejections come back to sender reputation.
Blocklists, auth failures, and policy blocks are what warmup prevents. Warm up your domain so your mail is trusted before you hit send.